We are an eminent trading, supplier, distributor and exporter of a vast array of oilfield chemicals. The range offered by us is processed using excellent quality ingredients that are sourced from most trusted and reliable vendors of the market with the aid of our sourcing agents. Our range is extensively used in various oil well drilling for pre-commissioning and post operative descaling (chemical cleaning) of boilers, pipelines, evaporators, heat exchangers and cooling towers.
Hydrochloric acid has many uses. It is used in the production of chlorides, fertilizers, and dyes, in electroplating, and in the photographic, textile, and rubber industries.
Calcium chloride is an ionic compound of calcium and chlorine. It is highly soluble in water and it is deliquescent. It is a salt that is solid at room temperature, and it behaves as a typical ionic halide. It has several common applications such as brine for refrigeration plants, ice and dust control on roads, and in cement.
Ammonium Chloride Injection, USP, 100 mEq, is a sterile, nonpyrogenic solution of Ammonium Chloride (NH4Cl) in water for injection administered (after dilution) by the intravenous route. Each mL contains 267.5 mg of Ammonium Chloride 5 mEq of ammonium and 5 mEq of chloride) and edetate disodium (anhydrous) 2 mg added as a stabilizer. pH 4.4 (4.0 to 6.0). May contain hydrochloric acid for pH adjustment.
It is a fertilizer made up of two nutrients, with a white grainy appearance that dissolves quickly in water and can be absorbed rapidly by plants. It is an perfect combination of 15.5% nitrogen in nitrate form that rapidly dissolves in water and 26.5% calcium. Its nitrate nitrogen and fully water soluble calcium combination provides good affects not found in any other fertilizer.
Treating and preventing low levels of vitamin C. It may also be used for other conditions as determined by your doctor. Ascorbic acid is a vitamin. It works by supplementing vitamin C, which is used in many functions in the body.
Ammonium bifluoride (ABF) is used for cleaning and etching of metals before they are further processed. It is used as an oil well acidifier and in the etching of glass or cleaning of brick and ceramics. It may also be used for pH adjustment in industrial textile processing or laundries.
Treating metabolic acidosis (a condition in which there is too much acid in the body) and certain drug intoxications, and replacing bicarbonate lost due to severe diarrhea.
Speciality chemicals (also called specialties or effect chemicals) are particular chemical products which provide wide variety of effects on which many other industry sectors rely. Speciality chemicals are such materials that are used on the basis of their performance or function.
Biocidal products are used to control unwanted organisms that are harmful to human or animal health, or that cause damage to human activities. These harmful organisms include pests.
Scale is the precipitate that forms on surfaces in contact with water as a result of the precipitation of normally soluble solids that become insoluble as temperature increases. The chemical treatment of water associated with oil and gas includes the application of scale inhibitors, such as phosphonates, to help maintain the integrity of equipment that is used during the drilling and production phases. Treatment is used to reduce the concentration of scale forming compounds that can accumulate in production wells, water and disposal wells, flowlines and surface equipment.
A corrosion inhibitor is a substance when added in a small concentration to an environment reduces the corrosion rate of a metal exposed to that environment. Inhibitors often play an important role in the oil extraction and processing industries where they have always been considered to be the first line of defence against corrosion.
Multi-Chem offers a complete line of water- and oil-soluble hydrogen sulfide scavengers that can be applied via continuous injection or through batch treatments.
Demulsiﬁers: key components of demulsifier formulations which enable the quick separation of produced water from oil. Separating oil from water can be very time critical due to short residence time.
Tightening legislation has encouraged many organizations to review their treatment of challenging oil / water mixtures. Depending on the regional requirements, residual oil limits can range from 40 ppm to as low as 10 ppm.
RX-33/1 is one of our range of Asphaltene Dissolver products. RX-33/1 has been designed to fully dissolve the asphaltene deposit, whereas xylene, for example, only dissolves the associated resins leaving crystalline particulate and sludge.
The major problem in oil extraction, production and line transporting is due to the buildup of paraffin which restricts the flow. Paraffin inhibitors are used to dissolve paraffin deposits and treat the paraffin in the reservoir to keep it in suspension.
Surfactant, also called surface-active agent, emulsion polymerization [Credit: EncyclopÃ¦dia Britannica, Inc.]substance such as a detergent that, when added to a liquid, reduces its surface tension, thereby increasing its spreading and wetting properties.
Foamers are surface-active agents used to create stable foams in saline aqueous produced or injected water. They specifically target air/water interfaces and create stable foams at elevated temperatures and pressures. By doing so, they provide functionality such as unloading water from low-pressure gas wells and diversion of enhanced oil recovery fluids.
A clean wellbore is one of the most critical aspects of a productive, trouble free completion. A clean production cased wellbore increases your ability to set and retrieve downhole tools. More importantly, a clean wellbore ultimately leads to enhanced production through reducing or eliminating fine solids that are potentially damaging to the formation.
Chemical phosphorus (P) removal during aerobic wastewater treatment induced by iron salt addition in sewer systems for sulfide control is investigated. Aerobic batch tests with activated sludge fed with wastewater containing iron sulfide precipitates showed that iron sulfide was rapidly reoxidised in aerobic conditions, resulting in phosphate precipitation.
Solvents can cause considerable confusion in reactions, because theyâ€™re listed along with the reagents of a reaction but often donâ€™t actually participate in the reaction itself.